![]() |
廈門航拓電氣有限公司
主營產品: PLC,DCS,伺服數控系列全系列,CPU,板卡,AB,Siemens,ABB,F(xiàn)ANUC, |

![]() |
廈門航拓電氣有限公司
主營產品: PLC,DCS,伺服數控系列全系列,CPU,板卡,AB,Siemens,ABB,F(xiàn)ANUC, |
參考價 | 面議 |
包裝印刷網采購部電話:0571-88918531QQ:2568841715
聯系方式:查看聯系方式
更新時間:2018-05-14 09:00:00瀏覽次數:617
聯系我們時請說明是包裝印刷網上看到的信息,謝謝!
6ES7414-3XM05-0AB0
6ES7414-3XM05-0AB0
現在供應*降價,低價狂歡。
[] 點擊 [] 各位老板年關降至,請要采購備件,急需各PLC 機器人的產品的。
[] 瀏覽 [] 想要質量好,價格好,保質保量嗎?我們就在這里,等著你們。
[] 詢價 [] 請不要猶豫了,請不要遲疑了,先到先得,錯過可要沒有了哦。
[] 訂貨 [] 請我們的 或 手機 ++ 。
[] 發貨 [] 或 1665532815 +++ 傳真
輸入保護電路
一般模塊電源產品都有內置濾波器,能滿足一般電源應用的要求。如果需要更高要求的電源系統,應增加輸入濾波網絡。可以采用LC或π型網絡,但應注意盡量選擇較小的電感和較大的電容。
為了防止輸入電源瞬態高壓損壞模塊電源,建議用戶在輸入端接瞬態吸收二極管并配合保險絲使用,以確保模塊在安全的輸入電壓范圍之內。為了降低共模噪聲,可以增加Y(Cy)電容,一般選擇幾nf高頻電容。R為保險絲,D1為保護二極管,D2為瞬態吸收二極管(P6KE系列)。
遙控開關電路
模塊電源的遙控開關操作,是通過REM端進行的。一般控制方式有兩種:
(1)REM與-VIN(參考地)相連,遙控關斷,要求VREF<0.4V。REM懸空或與+VIN相連,模塊工作,要求VREM>1V。
(2)REM與VIN相連,遙控關斷,要求VREM<0.4V。REM與+VIN相連,模塊工作,要求VREM>1V。REM懸空,遙控關斷,即所謂“懸空關斷”(-R)。
如果控制要與輸入端隔離,則可以使用光電耦合器作為傳遞控制信號。
模塊組合
(1)并聯擴容。將相同模塊輸出端并聯,可使輸出能力增強,但并聯模塊的輸出電壓要調整得比較*,以保證相對均流,同時避免不必要的振蕩。對有較大電流輸出的模塊,還可以仔細設計引線電阻,以達到均流效果。用這種方法并聯的模塊,不宜超過2個。同時,如果其中一塊模塊輸出有故障,整個系統都將不能正常工作。并聯擴容連接電路RL為負載。
(2)冗余熱備份并聯。將相同的模塊輸出端通過二極管后并聯可使輸出能力增強,以提高電源系統的可靠性。原則上如果配合相應輸出報警電路,將模塊放在可以拆卸的母線上,這樣,出現故障的模塊可以及時更換。用這種方法并聯的模塊,沒有量限制。D一般為肖特基二極管。
(3)串聯擴容。將相同模塊輸出端串聯,可使輸出電壓倍增,功率也相應增加,而串聯輸出端須接二極管以進行保護。
high availability field network. Each FDSI module can support up to 16 devices to read and write data, and up to 2,000 Distributed Control Interface (DCI) points. Ethernet versions can be fewer, depending upon
AP10/20 P91 - Windows
Server 2003 P91 As a multipurpose server running the Windows Server 2003 operating system with Service
Pack 1, the Model P91 server supports hosting I/A Series control stations, data acquisition and processing related to a broad range of applications, file serving capabilities, and the display of graphics and text. It also interfaces with corporate communication networks. The Model P91 server supports a USB mouse or optional USB trackball, an alphanumeric keyboard, up to two annunciator keyboards, annunciator/numeric keyboards, or annunciator panels, and up to four video monitors. The P91 server
AP10/20 P90 - Windows Server 2003 P90 The Model P90 Workstation Server is a 2U high rack-mounted server-class processor running Microsoft Windows Server 2003? operating system. As a multipurpose server running the Windows Server 2003 operating system with Service Pack 1, the model P90 server supports hosting I/A Series control stations, data acquisition and processing related to a broad range of applications, file serving capabilities, and the display of graphics and text. It also interfaces with corporate communication networks.The Model P90 server supports a USB mouse or optional USB trackball, an alphanumeric keyboard, up to two annunciator keyboards, or annuciator panels, and up to four video monitors. The P90 server also supports multiple optional touchscreens. The Model P90 server has an In Xeon? processor and can be configured with up to 1.2 TB of internal hard disk storage and up to 4 GB of ECC DDR-2 SDRAM. The serial attached SCSI (SAS) supports a system disk, expansion disks, or RAID1 or RAID5 hard drive Cluster I/O 200 Series I/O See Chart below for 200 Series part #s The 200 Series Field Bus Modules are the latest generation I/A Series I/O modules. The DIN rail mounted FBM subsystem provides a reliable, high speed communications interface between the host control processor (for example the I/A Series control station) and field I/O sensors and actuators. It incorporates innovative equipment packaging, and the use of fiber optic and/or coaxial cabling between modules to allow local or remote distribution of process I/O points. The DIN rail mounted Fieldbus Modules (FBMs) are compact, high-performance distributed process I/O modules. They perform the signal conversion required to interface the electrical input signals to/from the