HCM-A系列氣冷式工業冷水機 HCM-A series Air Cooled Industrial Chiller

HCM-A系列工業冷水機主要應用于塑膠成型機械的模俱冷卻，能精確控制模具溫度，縮短注塑周期，加速產品定形，提高塑膠制品表面光潔度，減少塑膠制品表面紋痕和內應力，使產品不縮水、不變形。其還適用于電鍍業、食品業、電子制造業、漂染業、超聲波機械冷卻等方面。

HCM-A series of air cooled industrial chillers is mainly used in cooling molds made by plastic molding machines. This product can accurately control mold temperature, shorten injection cycle and accelerate product shaping, improve the surface finish of plastic products, reduce surface marks and internal stress on plastics, make sure the product neither shrink nor deform. It also applies to the plating industry, food industry, electronics manufacturing, dyeing industry, ultrasonic mechanical cooling and so on.

機器特點:

冷卻范圍5℃~35℃。

不銹鋼SUS304保溫水箱。

P.I.D溫度控制，控溫準確可靠。

PC板故障指示，當發生故障時，可準確檢測故障異常。

采用獨立防凍溫度控制器，防止結冰。

壓縮機及水泵都配有過載器。

高低壓開關控制，靈活可調，精準保護壓縮機。

親水套片式冷凝器，換熱效果更佳。

螺旋式殼管蒸發器，換熱量大，換熱效果穩定。

冷媒選用R22，也可以選配環保冷媒R410A。

Features:

Cooling range: 5 ℃ ~ 35 ℃.

Water tank made of SUS304 stainless steel.

P.I.D temperature control, temperature control is accurate and reliable.

PC board fault indication when a failure occurs, you can accurately detect the fault or abnormity.

Using an independent anti-freezing temperature controller to prevent freezing.

Compressors and pumps are equipped with overload devices.

Low and high voltage switch control, flexible and adjustable, well protects the compressor.

Hydrophilic chip condensers to have better heat exchange effect.

Spiral shell and tube evaporators with large heat exchange capacity ａnd stable heat exchange effect.

Refrigerant: R22, environmentally friendly refrigerant R410A is also optional.

產品規格若有變更，恕不另行通知。